Industries / Oil and gas
PEEK for Oil and gas
Seal backup rings, valve seats and electrical insulators for downhole tools that see pressure, hot fluids, gas and rapid decompression.
- Sourcing
PEEK Parts for Oil and Gas: Seals, Seats and Insulators
PEEK in downhole and process service: seal backup rings, valve seats and insulators, the grades that hold up, and why rapid gas decompression decides the design.
- Sourcing
PEEK Backup Rings and Seal Design for Downhole Tools
PEEK backup rings stop elastomer seals extruding under pressure. How the clearance gap decides unfilled versus CF30, and the tolerances a gland fit needs.
- Sourcing
Explosive Decompression and PEEK: What Actually Happens
Explosive decompression is a real failure mode in oilfield plastics. How it happens, why PEEK resists it better, and what testing to request, not assume.
- Sourcing
PEEK vs Metal Alloys for Downhole Electrical Insulators
PEEK, metal and ceramic compared for downhole electrical insulators: service temperature, dielectric strength, weight, galvanic risk and machining cost.
- Sourcing
NORSOK and API Standards That Apply to PEEK Components
NORSOK and API standards qualify materials and testing regimes for oilfield PEEK, not every part built from it. What each one covers and what to request.
- Sourcing
PEEK Valve Seats: Grade Selection and Wear
Grade choice for PEEK valve seats, bearing grade or CF30, the wear mechanisms that shorten seat life, and when a metal or ceramic seat is the safer choice.