Guides / Machining
Machining PEEK on the shop floor
What happens between the drawing and the part, and which of it belongs in the quote.
- Machining
Oct 27, 2026Threading PEEK: Tapping, Thread Milling or Inserts
Threading PEEK holds up when the method suits the load. Compare tapping, thread milling and metal inserts, with engagement depth, pitch and torque limits.
- Machining
Oct 26, 2026Swiss Machining PEEK: Small Parts, Burrs and Concentricity
Swiss machining PEEK suits small, long, round parts. See how guide bushing fit, bar stock, burrs and concentricity decide whether the batch passes inspection.
- Machining
Oct 14, 2026Inspecting PEEK Parts: Temperature, Moisture, Fixturing
Inspecting PEEK parts means controlling temperature, moisture and clamping force. Learn when to measure, which gauges deform plastic and how to set criteria.
- Machining
Oct 12, 2026Drilling PEEK: Small Deep Holes Without Melting or Drift
Drilling PEEK deep holes works when heat and chips are managed. Peck rhythm, drill geometry, depth ratios and what a drawing should say about hole tolerance.
- Machining
Oct 11, 2026Deburring and Cleaning Machined PEEK Before Shipment
Deburring PEEK is not a quick file pass. Compare hand, brush, thermal and tumble methods, then see how cleaning and packing decide whether parts arrive usable.
- Machining
Oct 9, 2026Bonding PEEK: Adhesives, Laser and Ultrasonic Welding
Bonding PEEK is harder than bonding most plastics. Compare surface prep, epoxy adhesives, laser and ultrasonic welding, and which joints survive heat.
- Machining
Sep 26, 2026Common PEEK Machining Defects and What Causes Them
The defects that show up most on machined PEEK parts, cracking, warping, delamination and poor finish, what causes each one and what to change on the drawing or the process.
- Machining
Sep 26, 2026PEEK Machining: Grades, Tolerances and Stress in One Guide
A buyer's specification checklist for machined PEEK: which grade, what tolerance is realistic, where residual stress changes the answer, and what to write on the drawing.
- Machining
Sep 20, 2026Annealing PEEK Parts: Why Machined Parts Warp
Internal stress in extruded PEEK makes machined parts warp and bores go oval. What an annealing cycle looks like, when it is needed and what to put on the RFQ.
- Machining
Sep 20, 2026PEEK Machining Explained: What Shops Can and Cannot Do
How PEEK behaves on a machine, which grades cut easily, what tolerances hold at temperature and what to put on the drawing before you ask for a quote.
- Machining
Sep 20, 2026PEEK Machining Tolerances and Surface Finish Explained
Typical tolerances for machined PEEK, why thermal expansion breaks a tight fit at temperature, what surface finish shops hold and how to tolerance a drawing.
- Machining
Sep 20, 2026Machining PEEK: Tooling, Speeds and Feeds That Work
Tool geometry, starting speeds and feeds, coolant choice, drilling and threading practice for PEEK, and the setup mistakes that melt, chip or warp a part.
All guides and the questions they answer.